Masters Wall Print

Descripción

A mortar for stamped walls

Masters Wall Print can be applied with a thickness upper to 3 cm, offering the possibility to create deep textures and natural appearing surfaces without requiring added reinforcement on structurally sound vertical surfaces.

How to use :

Masters Wall Print can be applied on all rigid and clean supports. You must apply first the according bonding agent. Prepare the surface with Masters Prim (porous surfaces) or Master Prim Plus (non porous surfaces). Smooth surfaces needs to have a specific preparation.
After applying the primer, you must realise one small layer 2 ou 3mm and let it dry. This step creates a hook on smooth surface before loading in thickness. It does prevent the product to slipping off. In areas at risk of cracking, place a mesh fibreglass or metal. In hot weather and dry wind, you should spray some water on surfaces to avoid drying quick and cracks.
To prepare the mix, take a special bucket for mixing and put 6 liters water inside. Open your first bag of Masters Wall Print and add gradually this powder in the water. Mix with a professional mixer until obtain a homogeneous and smooth mass. The product is making with white cement and its basic colour is a mineral white. You can add some pigments if you want to obtain a different mass colour. Once the mix ready, apply it with a trowel to obtain the thickness desired (minimum 12/15mm). Rules and smooth with a ruler to get a good surface, regular and ready to print.
Once Masters Wall Print is laid down it may be stamped with a volatile release agent and worked with special tools.
When hardened, the wall may be colored with Masters water-based stains, dyes, or pigments in different coats until that you reach a natural and realistic result.
Then, protect it with 2 coats of a clear waterproof resin like Masters Ecolex Sealer

Masters Wall Print

€16.19 ~~€26~~

Información de envío

⚡️ Envíos y devoluciones

ENVÍO GRATUITO PARA TRES ARTÍCULOS
Las entregas estándar llegan en 3-15 días; entregamos todos los días.
Para entrega al día siguiente, realice el pedido antes de las 12 del mediodía de lunes a jueves.
Puede devolver su pedido por cualquier motivo, de forma gratuita, dentro de los 30 días.

Autenticidad

Compra con confianza sabiendo que cada artículo es 100% auténtico y garantizado como nuevo.

Nuestro equipo de expertos inspecciona cada artículo de arriba a abajo, de izquierda a derecha y todo lo demás. Revisamos cada detalle comenzando con el embalaje original, los accesorios, la forma, la textura, el estado, el olor y posibles defectos o fallos (si los hubiera).

¿Necesitas ayuda?

¡Siempre estamos felices de ayudar y asistir!
Contáctanos 7 días a la semana con cualquier pregunta que puedas tener. aquí

Descripción

A mortar for stamped walls

How to use :

Masters Wall Print can be applied on all rigid and clean supports. You must apply first the according bonding agent. Prepare the surface with Masters Prim (porous surfaces) or Master Prim Plus (non porous surfaces). Smooth surfaces needs to have a specific preparation.
After applying the primer, you must realise one small layer 2 ou 3mm and let it dry. This step creates a hook on smooth surface before loading in thickness. It does prevent the product to slipping off. In areas at risk of cracking, place a mesh fibreglass or metal. In hot weather and dry wind, you should spray some water on surfaces to avoid drying quick and cracks.
To prepare the mix, take a special bucket for mixing and put 6 liters water inside. Open your first bag of Masters Wall Print and add gradually this powder in the water. Mix with a professional mixer until obtain a homogeneous and smooth mass. The product is making with white cement and its basic colour is a mineral white. You can add some pigments if you want to obtain a different mass colour. Once the mix ready, apply it with a trowel to obtain the thickness desired (minimum 12/15mm). Rules and smooth with a ruler to get a good surface, regular and ready to print.
Once Masters Wall Print is laid down it may be stamped with a volatile release agent and worked with special tools.
When hardened, the wall may be colored with Masters water-based stains, dyes, or pigments in different coats until that you reach a natural and realistic result.
Then, protect it with 2 coats of a clear waterproof resin like Masters Ecolex Sealer

Masters Wall Print